Fly Fish Pen

Hello, welcome to this week with Wolf Studios!

brass hardware with images connected to fishing cast pen blank made from shop scraps

Recently I’ve been able to get another pen out and my word it’s turned out beautiful. The request I had for it was to use some type of wood, and we just so happened to have a few blanks we made a long while ago which were just some scrap pieces of wood from other pens.

Continue reading

Posted in Wood Turning | Leave a comment

Fellowes Office Suites Underdesk Keyboard Drawer Review

We recently purchased 3 of these during the office remodel.  I just installed one under the counter in the office today.  The price when we purchased was $32.49 each and it doesn’t look like that price has changed as of May 11, 2023.  Here are my thoughts so far:
http://<iframe sandbox=”allow-popups allow-scripts allow-modals allow-forms allow-same-origin” style=”width:120px;height:240px;” marginwidth=”0″ marginheight=”0″ scrolling=”no” frameborder=”0″ src=”//ws-na.amazon-adsystem.com/widgets/q?ServiceVersion=20070822&OneJS=1&Operation=GetAdHtml&MarketPlace=US&source=ss&ref=as_ss_li_til&ad_type=product_link&tracking_id=borouzenterpr-20&language=en_US&marketplace=amazon&region=US&placement=B0002LD0ZY&asins=B0002LD0ZY&linkId=0d3f83a7e139ec2a4d3108e87153a88b&show_border=true&link_opens_in_new_window=true”></iframe>

What was in the box:
Continue reading

Posted in Reviews | Leave a comment

Office Remodel

Where did all the posts go?

The shop was built with the intention of having office space in it.  For a long time that space was more of a hang out space where we took breaks while working on projects.  When I started working from home it became my space.  This worked because it had one desk and a credenza that we bought for $50 from Purdue Salvage in Lafayette Indiana a decade ago.   The two large cabinets that came out of our kitchen flanked the desk on either side.  We had two arm chairs that came to live here after my mother passed as our hang out chairs.  A small space heater that looks like a pot belly stove and lots and lots of shelves.

This is not a space you collaborate in.  It was also not working as a space that you create in.  It lacks space.  The first thing that needed to happen was the two huge space hogging cabinets needed to go.  They are well made cabinets which of course means they need to be shoe horned into some other space in the home because obviously you cannot just get rid of perfectly good cabinets, obviously.  Where should they go?  To the basement!  At which point I started dragging my feet and putting the project off BECAUSE the idea of getting them out of this small room, back to the house, and then down the stairs into the basement was not sounding like fun.  Plus it wasn’t  like I was thinking about how great they would look down there or how much better the space would be.

Then I had a new thought, a better thought, a thought that had never been thought before.  We will put them in the space formally known as garage.garage floor

This house has a two car + garage, when we first moved in this was where the shop went.  One of the first things we did was painted the floor which has held up for 15 years!  A challenge is that around one side and the front of the garage there is this raised area.  It’s not really big enough to do much with but it’s big enough to mess up your shop plans.  It also becomes a horrible safety hazard you had to watch yourself to make sure you were not going to step off it while carrying something heavy or dangerous or trip over up it if you were working on the main floor.

When the shop moved out we decided to put a wall up on the front of it and create a mud room.  This also had storage kind of like a butlers pantry.  But the space wasn’t designed as much as it organically grew out of everything unwanted.

There are so many bad life choices here it’s hard to know where to start.  You might also be asking how did we get from office remodel to this tragedy?

Because of these 2 large brown cabinets

Ignore the toilet paper and grocery bag, these are the two large cabinets that used to flank our refrigerator.   They are deep about 26.5″ deep and wide about 24″ wide and tall about 6′ tall.

But what to do with all the stuff that was already in this butlers panty?  Okay here we go:

  1. The three upper cabinets which were acting as lower cabinets with a counter on them come out of the pantry.  Move down to the shop and go up over the laser engraver/3d printer/small engine repair areas.
  2. The counter moves into the office to make one long shared desk.  We just need to add another 3′ section to cover that wall.  As soon as I get to town to get some more American Walnut stain.
  3. The two white melamine shelf units come out and get painted Expresso so that they match the other shelf unit and pick up the tones from these two large cabinets.
  4. The wire rack goes back in but not as a 4′ section that sat on the counter but it is not a full height wire shelf unit.
  5. The cabinet that had been built as a prop for a play stays but will get painted expresso like the rest of the shelves.
  6. The large shelf unit that was already expresso stays but moves over closer to the prop shelf unit.
  7. The carpet comes out.
  8. Tile goes in but of course Menards doesn’t sell the same tile that is in the rest of the mud room floor, of course.
  9. The maroon felt on the walls comes down, don’t ask, and white PVC sheet goods go up.   I already had a full sheet of this that I bought for another project, 7 years ago, and patching and priming and painting the walls was going to take forever so why not use this.  Just for luck lets buy another sheet and for fun lets make sure the colors are just slightly different. sigh.  In my defense I’m not even sure that Walmart sells the paint color that is on the one wall that is currently painted.
  10. Finally a light in the room that is “installed” or at least not dangling from a single screw.
  11. Two 2×2 sets of shelves out.  One is currently in the kitchen at the end of the counter holding my cookbooks.  The other has not found a home yet.

So far in the shop remodel we have one large section of counter up.  Shelves above the counter from above the window to the ceiling.  The single desk and credenza are still here but are together again on the back wall.  We put them on bed legs to raise them up so that the mini fridge can live under the desk.  There will be under desk mounts for the pc’s and keyboard/mouse trays plus a drawer from an old office unit will go between us.  Those arm chairs well they will now be desk chairs.  The inkjet, laser printer, and 3d printer will all live on the new credenza/single desk counters.  Plus the photography setup stuff can stay setup over there.

It’s been over a week now and nothing is finished.  I just got a functioning pc setup yesterday.  The garage is still littered with stuff that came out of the butlers pantry area and the shop space is almost unusable because of everything that came out of the office but has not found it’s way back in again.  This was supposed to be a 1 day 0 dollar redo.

So far we are at $290 for the butlers pantry alone.  Honestly that was where the most money was spent.  Unless of course you count the fact that Bill bought a new pc and two monitors for the shop office.  To be fair we shopped Purdue Salvage and monitors there were only $50 for 26″ Dell monitors with built in extra’s.  The pc was also refurbished/salvaged.

It is shocking how quickly costs start to add up.  The flooring in the pantry was where the most money went.  Each box was $50 and we needed 3 of them plus the grout.  The next biggest expense in there was the paint and primer for the shelves.

Stay tuned for revels of how both areas turned out.  Just as soon as I figure out how to put it all back together again.

Posted in Uncategorized | Leave a comment

EcoGlow 20 Safety 600 Brooder from Binsea


I first heard about this brooder from The Chicken Chick you can find her webpage here https://the-chicken-chick.com/ Years ago what brought me to her page was poop, I’ve been a fan ever since.  While some of the things she does are above my pay grade I applaud her passion.
Continue reading

Posted in Homestead, Reviews | Leave a comment

Dragons Blood

Greetings and Hello, welcome to this week with Wolf Studios.

Dragon Slayer pen in blue resin with copper veins

I’ve recently gotten another pen cranked out (After needing a second attempt at it) for a friend who requested a couple pens.

This one used a very unique blank and I have to say when I first saw how this one turned out (forgive the pun) I was just really in awe because the gold and blue/bronze colors really complemented each other and it is just gorgeous.

Continue reading

Posted in Wood Turning | Leave a comment

What happens when you go to the store

It started innocently, we were working outside and the rain was coming which ended working outside.  I suggested we run to the feed store to get chick feed.  The decision had  been made to increase the flock size by hatching eggs.  Then maybe in the next year or so as needed to would buy eggs and hatch those to maintain the flocks size but keep the gene pool from becoming a stick rather than a tree.
Continue reading

Posted in Homestead | Leave a comment

The good and the oops

So, welcome to this Wednesday with Wolf Studios, sorry it’s been a minute since the last post been relatively busy but I have managed to get down into the shop and work on some more pens.

The most recent two I’ve done are a couple of Big Ben Cigars and I do have to say I love doing these pens, very nostalgic for myself since they were the first ones I ever turned.

Continue reading

Posted in Wood Turning | Leave a comment

Photography Matters Part 2

Setting up the small lightbox makes getting pictures so much easier.  Learning more about the Cannon Rebel XS has made getting higher quality pictures possible.  Getting better pictures for the internal inventory system is important but maybe not as important as getting great pics for the website.   Lets talk where things are at currently.

Continue reading

Posted in Photography | Leave a comment

Photography matters

You don’t have to be a professional photographer to post pics of your work but knowing a few tricks can’t hurt.  Especially if you are posting to a webstore, sending a pic to a client or potential client, or looking to help clarify a post to help readers.

football pen in lightbox with no external lighting These two pictures were taken with the same camera, same auto focus settings, same lightbox. football pen in lightbox with external lighting

Continue reading

Posted in Photography, Wood Turning | Leave a comment

Re-learning silk screening

It all started with an innocent request, “Do we still have all that silk screen stuff?  If so I would like a t-shirt that says CERTIFIED PROFESSIONAL FRAUD.”
Certified Professional Fraud badge design.

Continue reading

Posted in Uncategorized | Leave a comment